BLOG

Update 1.11.0.0

In this update, we are introducing a new module – a backup-based car control unit simulator – UDS ECU Simulator!

Read More »
VCTool supports VAS5054
VAS5054

VCTool 1.10 update and direct support for VAS5054a

Starting with version 1.10 VCTool starts supporting VAS5054 interfaces via the standard D-PDU API driver without the need to install an additional SAE J2534-1 driver! Now the speed of work with this interface is not inferior to the speed of the fastest J2534 adapters. To connect via a standard driver, open the interface configuration window and select your VAS5054 on

Read More »

Flashing AISIN 09G from Rapid/Polo to Octavia

Demonstration of flashing the AISIN 09G gearbox control unit on a Skoda Rapid (VW Polo) 09G927158AL to the version from Skoda Octavia A7 09G927158AH using VCTool. The Tactrix Openport 2.0 interface was used for flashing. This video is a demonstration of the program’s capabilities and is not a guide to action! Everything you do – you do at your own

Read More »
Updates

VCTool update 1.9.0.0

This update introduces the following changes: New CAN Logger Correction of the driver working with the interface to eliminate packet loss UDS packet analyzer Search by frames and comments Display of control unit address or CAN ID Color visualization of incoming/outgoing frames based on CAN ID Increase the speed of data processing Monitoring mode Automatically extract data from segmented packets

Read More »
Scroll to Top

– или –

– or –