VCTool update v2.5

+ DoIP connection has been split into two modes: via VCI and using an Ethernet interface.
  If you are using a D-PDU interface, such as VAS6154 or SM3 D-PDU, use the CAN/DoIP switch.
  When connecting via an eNet interface, use the DoIP (Network) tab.
  If a DoIP connection cannot be established via VCI, a CAN connection attempt will be made automatically.

+ Added support for Scanmatik SM3 interfaces in D-PDU mode (Scanmatik driver version 2.23 or later is required), including DoIP protocol support (available only when using the D-PDU driver supplied by the interface manufacturer). SM3 can be used as a client interface in DoIP simulation alongside original VAS6154 interfaces.
  Using Scanmatik interfaces via the standard VW/ACTIA D-PDU API driver remains possible, but in this mode the interface works significantly slower.
  To use Scanmatik 3 in D-PDU mode, activation in the interface configuration utility is NOT required!

+ Added the ability for users with an Ultimate subscription to download flash containers from File Database Explorer.
  Not all containers are available for download. To prevent abuse and excessive server load, downloads are limited to a maximum of 5 per day.

+ Changes in SFD Dialog: the results of request execution and SFD token submission for ECU unlocking are now separated.
+ Added scan log in the Memory Cells module
+ Added automatic ALFID selection when scanning Memory Cells
+ Added the ability to manually add D-PDU API drivers through the local D-PDU editor
+ Added the ability to visually edit the system D-PDU API list (requires running with administrator privileges)
+ Added the ability to configure P2/P6Max, P2/P6Star, and RC78CompletionTimeout timings (About/Settings -> Service)
+ Added simulation of CAN addresses with extended addressing in ECU Simulator.
+ Added an event log to the ECU Simulator
- ELM/STN interface support has been discontinued.
* Bug fixes and stability improvements